Cinderella® Ball Valve Siphon Information for Incineration Toilet
Mar 27, 2024
- This siphon is both a control valve and a back-flow preventer all-in-one!
- Cinderella installers will use the standard set up as above for their installations.
- The part is supplied by Cinderella and is a condensation trap for the ventilation elbow with a pre-installed condensate drain hole.
- This siphon is to be used only if installing the drain inside a structure.
- If the drain is located outside the building, the siphon is not required or recommended to be installed.
- Siphon will crack and become damaged in colder environments if installed outside.
- Automatically Included in the Cinderella Freedom Ventilation Kit, due to gas code.
- Does not come with Comfort model since it combusts using electric heat rather than propane gas.
- Can be purchased for Cinderella Comfort installation as well.
- Always ensure the unit is still installed 2" from the rear wall per installation requirements outlined by the manufacture and required through building codes.
- Please note: some installers can add a custom hose with a clamp to simply run the drain to the ground; this choice is your preference.
- See diagram below for more information
